Marine Detailing
Marine Detailing to keep your vessel shipshape.
Saltwater, sun, and the elements can be harsh on your vessel, wearing down its appearance and integrity over time. That’s where we come in, with our treasure chest of detailing services designed specifically for the marine environment.
Imagine your boat not only gleaming under the sun but also having a protective barrier against the harsh marine elements.
Why invest in marine detailing?
Because it extends the life of your boat, maintains its value, and ensures it’s always ready for adventure. Plus, there’s nothing quite like the pride that comes with owning a well-maintained, stunning-looking vessel.
Ready to set sail with a boat that looks and feels brand new? Let’s dive in!
Marine Detailing Packages
$4/ft
Wash (Recurring Price)
Wash hull and topside, engine, brightwork, clean and dry windows
$10/ft
Detail Wash
Wash hull and topside, engine, metals, clean and dry windows. Remove mildew, mold, stains from seats and cushions. Clean compartments and hatches.
$15/ft
Premium Wash
Wash hull and topside, engine, metals, clean and dry windows. Remove mildew, mold, stains, from seats and cushions. Clean compartments and hatches. Condition seats and cushions, remove surface rust, clean canvas and isinglass(includes protectant), and polish brightwork.
$20/ft
Wash and Wax
Wash hull and topside, engine, clean , hatches, non skid, clean and dry windows. Wax smooth gelcoat on hull and topside (From the waterline up if in the water or from the bottom sides of the hull and up if out of the water.) Our Polymer wax typically lasts 3 months in exposed conditions. This does NOT include barnacle removal or the chine. THIS IS FOR NEW AND WELL MAINTAINED BOATS.
$35/ft
Wash, Compound, Wax
Includes deep clean of the hatches, storage compartments, restroom, interior and exterior. The boat is then dried before polishing all gel coat/ paint surfaces to bring back the shine and depth of the boat. A wax is applied to gel coat (from water line up) and interior, metals cleaned and waxed. This package is for boats that need oxidation/dull finish removed.
$40/ft
Premium Wash, Compound, Sealant
Includes deep clean of the hatches, storage compartments, restroom, interior and exterior. Compound and apply sealant to all gelcoat surfaces(from the waterline up if in the water or from the bottom sides of the hull up if out of the water.) Our Polymer Sealant typically lasts 4-6 months in exposed conditions.
Detailing services include:
- Buffing and Polishing with marine grade products
- Protecting the finish with waxes, sealants or ceramic coatings
- Remove all accessible light rust stains inside and out
- Clean and protect all vinyl, leather and plastic (seats and cushions)
- Clean and polish windshields and glass
- Clean all canvas and outdoor carpeting
- Interior – vacuum, wipe all surfaces, clean windows, seats and carpeting
- Polish all brightwork
- Clean and protect Isinglass/strataglass
Decal Removal
We will safely remove any unwanted decals, logos, striping, and stickers from fiberglass, windows, etc… without damaging the surface of your boat.
Teak Deck Cleaning
We know you want every aspect of your boat to look good, so we even clean and brighten teak decks! Whether it just requires a soap and water wash or a two-step acidic cleaner and brightener. We can get your dingy-looking teak back to that beautiful honey color it should be!
Interior Boat Cleaning
Boat Compounding and Waxing
Marine Coating Aftercare Guide
Beyond the Beading
Because you have invested into this technology, it shows you want the best protection for your boat. The following information helps you directly in this fashion. To take care of this new coating there are a few easy to understand fundamentals that will make the whole picture of easy maintenance super clear!
Smart Wash Procedures – GTECHNIQ G-WASH Smart Soap and DryLux XL™ Drying Towels
Wash hack#1: When you only use your boat lightly for the day, you can get away with simply rinsing and drying all surfaces without the need to use soap.
Full Wash: After heavy use, whether it be covered in the foot prints, salt, or fish blood, follow the steps below to easily clean with 10X results and efficiency.
Using microfiber tools and towels will be less abrasive and more effective than the brushes you may have used before. Drying has never been faster than during use of our DRYLUX XL Ultra Plush Drying towels. These towels can soak up water faster than any chamois mop on the market and are soft and safe for every surface. Use the Detox Smart Soap to create rich soap lather. Dilute according to directions. When washing is complete dry all surfaces. DO NOT leave to air dry. Lay the towel out and just walk and watch the water disappear. When it’s full set it down and grab another DRYLUX XL one and just keep going instead of wasting time ringing out the towel.
Stain removal – Fast Tips, Simple Tricks
Surface stains become much easier to fight after the Ceramic coating has been installed. No need to resort to heavy chemical use or abrasive substances. If you have a greasy stain from a service or shoe brand that does not normally come off with a simple eraser use the Ceramic Cleanse product with the eraser and quickly remove.
Rust stains: Utilize oxalic acid products if necessary, it will not hurt the coating but will remove the stain. This is common near screws and other metal hardware.
Decks: Most people walk on their decks with their bare feet which can discolor over time. Don’t fear this is just oil sitting on top capturing dirt. You may take bleach diluted 1 to 5, scrub into the deck slightly and rinse away. To neutralize the bleach 100% follow up with vinegar, simply scrub over the area once and it will deactivate the chemical. Rinse thoroughly and your decks should be beading up and white just like new.
Water spots: In order to keep the surface free of water spots never wash and leave to air dry especially multiple times. Dock water or hard water could be the worst and will eventually effect the coatings performance.
You may choose to use straight white distilled vinegar to remove freshwater spots if they occur.
Keep it smooth – CERAMIC FAST COAT
Wash Hack#2: To save time while you dry, spray a fine mist of GTECHNIQ FAST COAT in front of your towel. This will allow you to apply a refresh protectant and dry at the same time.Level any streaks with a regular, dry microfiber towel.
To keep your coating at its peak performance a use the once per month during drying or after the boat has been cleaned and dried. This product can be applied to 100% of the vessel. Simply spray, wipe on, level with a towel and move on.